In manufacturing and logistics sites, there are many transport lines used for transporting and sorting products.
The important thing when transporting goods on this conveyor line is to "transport goods without stopping them."
However, even if the transport is smooth at first, years of wear and tear can cause the material to become less smooth, slowing down the transport speed.
Therefore, by applying adhesive tape made of fluoroplastic or ultra-high molecular weight polyethylene, which has Lowest friction, to the guides and chutes of the conveying line, it is possible to improve the slipperiness and increase conveying efficiency.
If you feel that your conveyor line is no longer sliding smoothly, be sure to give our adhesive tape a try.
If you have any applications other than conveyor lines where you would like to impart Lowest friction, please feel free to contact us and we will suggest suitable products.
fluoroplastic adhesive tape
ASF-110FR
The base fluoroplastic film, which has excellent Lowest friction properties, chemical resistance, and elasticity. The silicone adhesive allows it to be used in places exposed to heat up to 200°C.
| Nominal thickness (mm) | Width (mm) | Maximum width (mm) | Length (m) |
|---|---|---|---|
| Standard products | |||
| 0.08 | 10, 13, 19, 25, 30, 38, 50, 100, 150, 200, 250, 300 | 420 | 10 |
| 0.13 | |||
| 0.18 | 13, 19, 25, 30, 38, 50, 100, 150, 200, 250, 300 | ||
| 0.23 | 13, 19, 25, 30, 38, 50, 100, 150, 200, 250, 300 | ||
| 13, 19, 25, 30, 38, 50 | 5, 10 |
*We can also manufacture widths other than those listed above, as long as they are within the maximum width. Please contact us for details.
*Please contact us if you have any length requests, such as long rolls.
Product details page: https://www2.chukoh.co.jp/products/tape/asf-110fr/
ASB-110
Carbon-filled fluoroplastic film is used as the base material and has excellent Lowest friction ・Antistatic and chemical resistance ・Stretchability. Prevents static electricity charge due to friction, and suppresses foreign matter adhesion and Lowest friction lowering. In addition, the use of silicone adhesive allows the product to be used in places where heat up to 200°C is applied.
| Nominal thickness (mm) | Width (mm) | Maximum width (mm) | Length (m) |
|---|---|---|---|
| Standard products | |||
| 0.13 | 13, 25, 38, 50 | 450 | 10 |
*We can also manufacture widths other than those listed above, as long as they are within the maximum width. Please contact us for details.
Product details page: https://www2.chukoh.co.jp/products/tape/asb-110/
Ultra-high molecular weight polyethylene adhesive tape
AUE-112B
The base material is ultra-high molecular weight polyethylene film, which has excellent Lowest friction and abrasion resistance. As it uses acrylic adhesive, it can be used in places where it is exposed to heat up to 80°C.
| Nominal thickness (mm) | Width (mm) | Maximum width (mm) | Length (m) |
|---|---|---|---|
| Standard products | |||
| 0.18 | 19, 25, 50 | 500 | 40 |
| 0.30 | 25, 50 | 20 | |
| 0.55 |
*We can also manufacture widths other than those listed above, as long as they are within the maximum width. Please contact us for details.
Product details page: https://www2.chukoh.co.jp/products/tape/aue-112b/
AUB-112B
The base material is ultra-high molecular weight polyethylene film, which has excellent Lowest friction and abrasion resistance. It prevents static electricity buildup caused by friction, and prevents foreign matter from adhering and reduced Lowest friction. In addition, since it uses acrylic adhesive, it can be used in places exposed to heat up to 80°C.
| Nominal thickness (mm) | Width (mm) | Maximum width (mm) | Length (m) |
|---|---|---|---|
| Standard products | |||
| 0.16 | 25, 50 | 270 | 20 |
*We can also manufacture widths other than those listed above, as long as they are within the maximum width. Please contact us for details.
Product details page: https://www2.chukoh.co.jp/products/tape/aub-112b/
